---Raising Light co.---

EQUIPMENT

Max-Plus CNC Measuring System

Newly designed optical system, equipped with advanced flat-field achromatic objective lens, all lens are based on the overall anti-reflective vacuum coating processing.

1.   Digital High Resolution Sentek Color CCD
2.   19” High Resolution TFT-LCD Color Monitor
3.   Stage: 25” X 29” X 8” (620 X 720 X 200 mm)
4.   XYZ-axis linear scale
5.   Super High Precision 3.5+L/100 um

Apex M32

Apex M32 Metallurgical Microscope Polarized Measuring Equipment

1. Metallographic Lens

2. Eyepiece: 10x Wide Angle

3. Objective: 5x / 10x / 20x / 50x Achromatic objective

4. Lighting: 6V 20W Halogen bulb

5. Condenser: Dual-lens Abbe polyethylene device, with a two-polarizer and single color (blue, green, yellow) filter

6. Newly designed optical system, equipped with advanced flat-field achromatic objective lens, all lenses are based on the overall anti-reflective vacuum coating processing, the image of the bright, high resolution power

7. Stage: 300 X 200 X 150 mm

EQUIPMENT

Optical Measuring Equipment

Horizontal measurement taken workpiece ; Best Space Design ; Easy to uninstall

1. Body Size: 800mm X 600mm X 1600mm

2. Measuring Stage: 700mm X 500mm

3. Capable of Backlight module under 27”

EQUIPMENT

Optical CCD Measuring Equipment

1. CCD Brand: Kodak-SIG(USA)

2. CCD Model: Dedicated interface for RADAM optical inspection machine

3. CCD Specification: Astronomy camera, 150J megapixel (1530X1020) ;

CCD Size (13.8x9.2mm) ; with three-color RGB filter separation, Weight 900g, T-Mount, Diameter 12.5cm X Highness 7.5cm

4. Lens Brand: COSINA

5. Lens Specification: F3.8/20mm/ Modified T-Mount

EQUIPMENT

Slitting Machine

Model: RLO 130 Speed: 300m / min
Automatic editing line tracker
Discharge resistance weight 800kg
Receipts Axis 3 "/ 6" in

EQUIPMENT

Cutting Machine

RLO-100
Conference area: 900mm * 900mm
Tolerance: ± 0.1mm
XY axis can be adjusted

EQUIPMENT

Laser machine

Wattage: 30W
Laser head: synrad 48-2 CO2 LASER
Processing range: 900mm * 600mm
Cutting Engraving speed: 1 ~ 1200mm
Drive: servo & Timing Belt

EQUIPMENT

Multifunctional laminating machine

Multiaxial posted width 450mm
Air shaft
shaft torque and tension independent control

Eye control can be electrically cut length

You can receive the entire volume

EQUIPMENT

Press

35 tons punch
600mm * 500mm
Rocker slider lift
Hand automatic continuous punching
Working Speed : 130 / min

EQUIPMENT

QC workbench

Cleanliness to meet customer requirements

EQUIPMENT

Tensile testing machine

1. Machine capacity: 5KN
2. Test Stroke: 400mm (excluding fixture)
3. Effective use width: Φ140 mm
4. Machine power: servo motor drive
5. Transmission: Ball screw, can significantly reduce noise and transmission losses, increase the transmission efficiency
6. Speed range: 0.03 ~ 1000mm / min can be set (can also be set by a digital computer)
7. Force Sensor memory lock can remember all relevant parameters when changing different sensors

Address: NO.56, Wugong 1st Rd, Wufeng Dist., Taichung City 41353, Taiwan(R.O.C.)

(Wufeng Industrial Zone)

TEL: +886-4-23330778　FAX: +886-4-23396565